I am in the middle of building a new house gun. As I mentioned here, I want to build a weapon around the 300BLK cartridge. I want to put a can on it, so I can defend my home with a suppressed subsonic round and shoot a critter who breaks into my house without losing an eardrum.
So I decided to buy a 300BLK upper from PSA, settling on this particular one. I mounted it to a spare lower that I had lying around (Spike’s Tactical Pirate lower), and off to the range we went.
I started with 125 grain bullets. They left the barrel at just under 2000 fps, according to my chrono. Cycled fine, both suppressed and unsuppressed. The sound was OK at 90 dB and about 120 dB.
Then I switched to subsonic: 200 gr at about 1000 fps. That’s when I hit a snag. The cases were ejecting at 3 o’clock, but I was having symptoms of short stroking. When unsuppressed, it was basically a single shot rifle. It would fire, eject, but fail to pick up the next round. Cycle the bolt, it would chamber, fire, eject, and then fail to pick up. So I thought maybe the subsonic ammo just wasn’t gassing enough. I tried using the suppressor. When I did that, spent cases would eject, then about 10% of the time, I would get the next round hung up and failing to feed. (FYI: the suppressed subsonics were about 82 dB.)
About 50% of shots would simply not get picked up at all: Bolt forward, empty chamber. The other 40% of the time, it would fire and cycle normally.
I am thinking it’s either undergassed, or the buffer or the spring are too heavy when using the lower powered subsonics. What say my readers?
0 Comments